Extreme Wot 4

Hi Folks
Progressing along well found the first problem with the elevator servos. The rear servo is to deep so had to use some 3mm packing to clear the inside fus. also turn both servos around 180 deg. so the wiring was clear from rubbing against the other servo. So the supplied pushrods have to be remade.

Applied PVA glue to all the joints in the fus for added strength and drilled 3 x

3mm drainage holes in bottom of fus for spillages or leaks and then fuel proofed all the insides. Fitted supplied tank no problems.
RcFly