Hi All - Dom here. I was the chap on the flightline at least year's event taking a few vids. Joe asked me to put together a video ad for this year's event so I cut together some footage from last year a made a quick 20 second teaser with a bit of background music. Any feedback welcome. Cheers and see you at this years gig - Dom
Rapid RC
▼
Tuesday, 31 March 2015
Field Update
Tuesday, 17 March 2015
Brass Wheel Collets
Hi all.
STUCK. Need 4 brass wheel collets with fitted grub screws - to fit a 6.03 mm U/C axle shaft.
Tried drilling out the 5mm type but there is not enough "meat" left for the grub screw to bite and the thread strips. Needs to hold very firm...
STUCK. Need 4 brass wheel collets with fitted grub screws - to fit a 6.03 mm U/C axle shaft.
Tried drilling out the 5mm type but there is not enough "meat" left for the grub screw to bite and the thread strips. Needs to hold very firm...
Monday, 9 March 2015
Of Interest For FPV.
Yet again it seems like they all know best...
Check this out but start the video timeline from around 6.00. - Enjoy. Regards Peter
Sunday, 1 March 2015
Hows Our Flying Field Getting On ?
Hi all. Felt the flying field was worth a visit to see how things were coming along. Although there is a lot of water around I can report that the field work has been a great success because for a start the main area is not flooded like it always used to be - its draining off into the side ditches as it should - they are full.
The main feature is IT IS VERY FLAT INDEED and once its rolled and the grass is cut it will be a dream.Will see you all soon - Peter.
The main feature is IT IS VERY FLAT INDEED and once its rolled and the grass is cut it will be a dream.Will see you all soon - Peter.